Leather adhesive fastness of hot-melt adhesive film H3S2

Product Numbers: H3S2
Price: US $1.2~1.6/square meter
Product description: Anhui company produces leather adhesive hot melt glue, adhesive used in leather field, the film can be the first by the roller thermal compound machine attached to a leather the reverse side, with glue leather by heating, and the cloth, non-woven fabrics, leather, sponge, resin, metal and other materials. Environmental protection, no smell, convenient operation, replace the ideal adhesive glue. High-quality hot-melt adhesive film, please select Kunshan anhui!

INTRODUCTION

Hot melt adhesive film, also known as hot hot glue, hot melt glue, hot melt adhesive, which is similar to the double-sided adhesive, the adhesive material has two permanent adhesive catch. Products by the hot melt adhesive film layer and not viscose release paper, adhesive layer under normal temperature feels like ordinary film is not the same as the viscous heating to the melting point, layer after layer melting, producing strong viscosity, the two layer of adhesive material is firmly stick to.

Characteristics of hot melt film

Hot melt adhesive film inherited in hot melt adhesive bonding of environmental protection, wide range, rapid bonding characteristics, widely used in textile fabric adhesive, leather products, plastic products, adhesive bonding of foam products, adhesive, metal composite plate bonding, electronic field. Because there is no viscosity hot melt adhesive layer under normal temperature, convenient transportation and storage and transportation, is often used to sell as a whole, some material back with hot melt adhesive such as: trademark gum, embroidery superscript gum, gum, PVC gum badge, reflective material, decorative film adhesive gum, decoration materials and so on.

Our company is a professional manufacturer of hot melt adhesive film, there are five types of hot melt adhesive film under 10 varieties, optional, are suitable for various applications, specific parameters see our website or contact our sales staff, we will provide the most suitable for your use of raw materials and solution for you.

Recommend to you using the introduction of hot melt adhesive

H3S series hot melt adhesive film for the following performance by the customers choose the PVC trademark glue, PVC adhesive bonding standard high-frequency, leather, embroidery superscript trademark adhesive, vamp without sewing, the following properties: Stick

Product type: H3S series hot melt adhesive film

Main ingredients: copolyesters

The appearance of products: hot-melt adhesive film layer + no adhesive release paper (a roll)

Regular width: 48CM, 50cm, 100cm, 138cm, other width can be customized

Conventional thickness: 0.06mm, 0.08mm, 0.10mm, 0.12mm, 0.15mm, 0.18mm

The length of each volume: 100 yards, 200 yards, 300 yards or according to customer requirements

The melting temperature: 110~120 ℃, 120~130 ℃

Press temperature: 140~150 ℃, 150~160 ℃

Press time: 10~15 seconds

應用領域：PVC商標背膠，PVC高頻標背膠，皮革粘接，繡花標商標粘接，鞋面無車縫,… ..

Washing performance: a good wash durability, resistance to 40 degree wash.

Performance of temperature: -5 degrees ~100 degrees environment does not change adhesive fastness.

Objective: H3S series of plastic film on the leather, fabric, PVC material has good bonding fastness, good washing performance, moderate price, market consumption. But the layer in winter is a little hard, low temperature resistance is not good, such as the need for adhesive layer is soft, products need to be used in low temperature is extremely cold conditions, can choose the company H3T series of plastic film.

Method of use: the usage and the double-sided adhesive paste, 1, first will glue face toward a bonding material A, machine heat 5 seconds, layer glued to your bonding material A; 2, tear off the release paper, then will be affixed with glue A material toward the rubber surface, adhesion B material bonding position, with an electric iron or hot pressing equipment, continuous press 15 seconds, after cooling, adhesive AB two materials permanently live.

Note: press temperature and press time is only recommended conditions, and pressing equipment, are bonded material thickness, thermal conductivity, pressure are relations, the user needs to confirm the specific experimental conditions according to the.

PREVIOUS：High-grade hot-melt adhesive film with a NEXT：Leather, PVC leather, PU leather adhesiv